Sony DRU-830A 18x DVD±RW/RAM

While CPU, memory, OS and other variables don't often make a huge difference, there are some nonetheless. We have a computer that is used only for testing hardware. We do this so all tests can be compared reliably.

Test System:

For DVD writers the performance tests are broken down into four sections: CD read, CD write, DVD read and DVD write tests. Each benchmark test has been run three times. The score given is an average of the three. DMA has been enabled in device manager for all IDE devices supporting it.

CD Read Tests: For the read performance section of the CD-ROM benchmarks, CD WinBench 99 v3.0 and CD Speed v4.60 are used to test read speeds, seek times and CPU usage. For DAE testing both CD Speed and CD DAE are used. CD Speed is used to give an overall DAE speed rating and CD DAE is used to give the track by track extraction speeds and to check the extracted tracks for errors the drive may have created.

CD Write Tests: To test the write speeds, Nero Burning Rom is used to write 700MB to our test media. Times are recorded. To test rewrite scores, Nero is used again to time how long it takes to write 400MB of random files and directories. Then Sonic's DLA is used to test packet writing speeds. The same files are copied and pasted in Windows Explorer and timed.

DVD Read Tests: For the read performance section of the DVD benchmarks CD Speed v4.60 is used to test read speeds, seek times, and CPU usage.

DVD Write Tests: To test the DVD write speeds, Nero Burning Rom is used to write 4GB to our test media. Times are recorded. Then Sonic's DLA is used to test packet writing speeds. The same files are copied and pasted in Windows Explorer and timed.

CD Winbench 99 Scores:

The CD Winbench test is as close as we can get to testing every day usage. It fires off eight different applications using scripts. This tries to mimic the activities of a person loading these programs onto their own computer.

Sony's new DVD writer performed pretty well in our CD Winbench tests. While the DRU-830A's overall score wasn't as high as the Plextor's, it had a low access time and some very good transfer rates. It started reading at almost 22x (3300 / 150) on the inside and reached a maximum speed of about 43.5x (6530 / 150) on the outside.

CD Speed v4.60 - Pressed CD:

For this test I used a pressed CD containing one Mode 1 data track. The disc is 74:38 in size and is full of data and directories.

Turbo Boost On

Turbo Boost Off

	Sony DRU-830A	Samsung SH-S182D	LG GSA-H10N	Plextor PX-760A
Transfer Speed Average: Start: End:	36.39x 20.73x 48.11x	36.54x 20.89x 48.30x	35.57x 20.42x 46.78x	36.76x 21.27x 48.63x
Seek Times Random: 1/3: Full:	95ms 106ms 177ms	105ms 114ms 178ms	114ms 130ms 175ms	96ms 113ms 172ms
CPU Usage 1x: 2x: 4x: 8x:	1% 1% 2% 3%	0% 1% 3% 6%	1% 1% 3% 21%	0% 1% 2% 4%

The DRU-830A performed very well when reading pressed CD's. With its Turbo Boost enabled, the drive had no problems reading our test disc at 48x. Looking at the other scores, you can see that its seek times were also quite good.

CD Speed v4.60 - CD-R Media:

For this test I made a copy of our pressed test CD. I used 12x rated Memorex Gold 74 minute media for the tests.

The DRU-830A was a little faster when reading CD-R media. Thanks to this small speed boost, the drive was able to reach a maximum transfer speed of more than 49x.

Sony's new DVD writer had no problems recognizing our 99 minute CompUSA media. The DRU-830A read our test disc from start to finish, reaching a maximum transfer speed of 53.03x! This is pretty good for a drive rated at only 48x.

CD Speed v4.60 - CD-RW Media:

For this test I made a copy of a pressed test CD. I used some PNY 80 minute CD-RW media for the tests.

Like the other drives, the DRU-830A had to slow down to read CD-RW media. While not as fast as the drive from Plextor, it had no problems reaching a maximum transfer speed of 40x in our tests.

CD DAE and CD Speed v4.60 - Pressed CD:

For this test I used Pure Funk. The CD is almost exactly 74 minutes. This helps to squeeze the maximum performance out of the CD.

Exact Audio Copy can tell us a lot about a drive's capabilities. You can see from the screen shot that while the Sony DRU-830A supports accurate stream and has the ability to retrieve C2 error information from the CD, it does not cache audio data.

CD Speed	Sony DRU-830A	Samsung SH-S182D	LG GSA-H10N	Plextor PX-760A
Average: Start: End: DAE Quality: Accurate Stream:	30.97x 17.71x 40.92x 10 Yes	31.09x 17.78x 41.08x 10 Yes	30.73x 17.95x 40.68x 10 Yes	31.35x 17.97x 41.48x 10 Yes

The DRU-830A did fairly well in our DAE tests. While not nearly as fast as some of the other DVD writers we've tested, it hadno problems ripping pressed audio CD's at 40x.

To get a better look at the quality of the extracted audio we use CD DAE. CD DAE is actually designed to be an audio ripping program. It converts the CD-DA on the CD to .wav files. We use it in our testing because it can also be used as a quick and easy way to test the quality. Where CD Speed tests the DAE as one large session, CD DAE extracts each CD track individually. It actually extracts each track twice and then compares them to check for any errors. Every error a drive creates could be a hiss or pop you would hear later in the audio tracks.

While the DRU-830A started out a little faster when extracting our test CD with CD DAE, its average and maximum speeds were slower than what we saw with CD Speed.

CD DAE and CD Speed v4.60 - CD-R Media:

For this test I used a copy of the Pure Funk CD. It's burned onto the same Memorex Gold 74 minute media I used in the CD Speed tests.

While the DRU-830A was a little slower when extracting audio from CD-R media, this didn't keep it from reaching amaximum DAE speed of 40x in our tests. So how did it do in CD Speed's advanced DAE tests? Take a look below.

Sony's new DVD writer completed CD Speed's advanced DAE tests with an average score of 29.18x. The drive had no problems passing all of the on-the-fly tests and did not create any errors. If you look at the advanced features, you can see that the DRU-830A was able to read the CD-Text and subchannel data but failed to read the lead in and lead out sections of the CD.

To see how well Sony's DVD writer can read scratched and dirty discs, I used CD Speed's ScanDisc utility to see how many sectors were damaged or unreadable. This is a very rough, but good way to test the drive's error correcting abilities.

CD Speed - ScanDisc

The DRU-830A handled scratched discs relatively well. By looking at the screenshot, you can see that the drive considered only 60.6% of the CD to be "damaged". More importantly, none of the sectors on the disc were unreadable.

You can also get an idea of how well the drive can read scratched and dirty discs by using CD DAE. CD DAE will extract the audio tracks twice and then compare them. From this information we can see what the drive's average speed was and how many errors it generated.

Here too, the DRU-830A did pretty well. The scratches on the disc had little effect on the drive's speed and the number of errors remained relatively low.