What's in the box?:
- LG BH08LS20 Super Multi Blue Blu-ray Disc ReWriter
- BD Rewriter Drive Solution CD
- Owner's Manual
- SATA Cable
- SATA Power Cable
- Mounting Screws
- System Requirements for Blu-ray Disc Playback
- Warranty Information
Physical Features:
The drive LG sent us for this review was manufactured in December of 2008 and had firmware version 1.00. At the time of this review, this is the only official firmware available for the BH08LS20.
From the front, the BH08LS20 looks very similar to LG's previous Blu-ray Disc rewriter, the GGW-H20L. While there are a few slight differences, the two drives share the same basic design including the glossy black plastic and silver highlights. The BH08LS20 also has its share of logos. Along with the large "Super Multi Blue" and "LG" logos, you can see one showing support for the Blu-ray Disc format.
Below the tray you can see the BH08LS20's single LED. Off by default, this LED lights up a bright blue whenever the drive is reading or writing.
The rear of the BH08LS20 is pretty straightforward. By looking at the picture above you can see the drive's SATA interface and power connector.
Technical Specs:
The specs below have been taken from LG's website and the manual that came with the drive.
LG BH08LS20 Super Multi Blue 8x Blu-ray Disc ReWriter | |
BD-R Write Speeds | 8x, 6x (CAV) 4x, 2x (CLV) |
BD-R DL Write Speeds | 8x (CAV) 4x, 2x (CLV) |
BD-R LTH Write Speeds | 2x (CLV) |
BD-RE Write Speeds | 2x (CLV) |
DVD+R Write Speeds | 16x (CAV) 12x, 8x (P-CAV) 8x (Z-CLV) 4x, 2.4x (CLV) |
DVD+RW Write Speeds | 8x (Z-CLV) 6x, 4x, 2.4x (CLV) |
DVD-R Write Speeds | 16x (CAV) 12x, 8x (P-CAV) 8x (Z-CLV) 4x, 2x, 1 (CLV) |
DVD-RW Write Speeds | 6x, 4x, 2x, 1x (CLV) |
DVD+R DL Write Speeds | 4x, 2.4x (CLV) |
DVD-R DL Write Speeds | 4x, 2x (CLV) |
DVD-RAM Write Speeds | 5x (P-CAV) 3x, 2x (Z-CLV) |
CD Write Speeds | 40x (CAV) 32x, 24x (P-CAV) 16x, 8x (CLV) |
CD Rewrite Speeds | 24x (Z-CLV) 16x, 10x, 4x (CLV) |
BD Read Speeds | 8x Max (BD-ROM Single Layer) 8x Max (BD-ROM Dual Layer) 8x Max (BD-R) 8x Max (BD-R DL) 4.8x Max (BD-RE) 4x Max (BD-R LTH) 4.8x (BDMV) |
DVD Read Speeds | 16x Max (DVD-ROM Single Layer) 8x Max (DVD-ROM Dual Layer) 12x Max (DVD±R) 10x Max (DVD±RW) 8x Max (DVD±R DL) 8x Max (DVD-Video) 5x, 3x, 2x (DVD-RAM) |
CD Read Speeds | 48x Max (CD-ROM/CD-R) 32x Max (CD-RW) |
DAE Speeds | 40x Max |
Buffer Size | 4 MB |
Access Times |
180 ms (BD-ROM) 160 ms (DVD-ROM) 180 ms (DVD-RAM) 150 ms (CD) |
CD Formats | CD-DA CD-ROM CD-ROM XA CD-I Video CD Photo CD CD-Extra CD-Text CD-R CD-RW |
DVD Formats | DVD-ROM DVD-Video DVD+R/RW DVD-R/RW DVD+R DL DVD-R DL |
BD Formats | BD-ROM BD-R/RE BD-R/RE DL |
BD-R Recording Modes | Sequential Recording Mode With And Without Pseudo-Overwrite |
BD-RE Recording Modes | Random Write Sequential Recording Mode Without Pseudo-Overwrite |
DVD+R Recording Modes | Sequential Recording |
DVD+RW Recording Modes | Random Write |
DVD+R DL Recording Modes | Sequential Recording |
DVD-R Recording Modes | Disc At Once Incremental Recording |
DVD-RW Recording Modes | Disc At Once Incremental Recording Restricted Overwrite |
DVD-R DL Recording Modes | Disc At Once Incremental Recording Layer Jump Recording |
DVD-RAM Recording Modes | Random Write |
CD Recording Modes | Disc At Once Session At Once Track At Once Packet Writing |
LightScribe:
The BH08LS20 is the latest Super Multi Blue drive from LG to feature LightScribe technology. Developed by HP, LightScribe lets you burn durable, silk screen quality labels directly onto your CD's and DVD's using the same drive that burned the data. According to HP, it's as simple as burning the data, flipping the disc, and then burning the label.
Of course you can't do this with just any drive, media or software. While LightScribe capable drives use the same laser when burning both the data and label, they have to be able to accurately control the laser's focus and position as well as the spindle speed. They also must be able to recognize LightScribe media. These special discs have a thin dye coating on the label side that absorbs laser light. This triggers a chemical reaction that produces a color change, allowing the user to print text, artwork or graphics.
Even if you have a LightScribe capable drive and media, you will need software that supports it. Most major software companies have pledged support for the technology. However, at the time of this review, the list of compatible software is still relatively short. For the BH08LS20, LG turned to CyberLink. Using the bundled LabelPrint software you can create and burn LightScribe disc labels.
Once you've created your LightScribe label, you're ready to print it. Before you can do this though, you will need to choose the contrast. Keep in mind this option not only changes the level of detail, it also affects the amount of time it takes to print the label. The higher the quality, the longer the process will take.
How long does it take to print a label? For testing purposes, we printed a disc using Memorex's LightScribe v1.2 color CD-R media, with the quality set to "best". The results are shown below.
Memorex CD-R v1.2 - 31 minutes |
More Features:
By looking at the picture below, you can see that LG's new Super Multi Blue drive is identified as an "HL-DT-ST BD-RE BH08LS20."
The Nero screenshot also shows that the BH08LS20 has a maximum CD writing speed of 40x and a 2048KB buffer. This buffer is also backed up by some form of buffer underrun protection. According to Nero, the BH08LS20 can write CD-Text and overburn. When testing the drive's capacity I found that the drive was able to overburn up to 95:10 with CompUSA's 99 minute CD-R media.
Using Alex Noe's Weak Sector Utility we were able to determine that the BH08LS20 is a "two sheep" burner. This means that Sony's new drive is capable of backing up titles protected by SafeDisc 2, including version 2.51.
Here is a screen shot from Nero's InfoTool. This program queries the drive to see what its reading and writing capabilities are. InfoTool had no problems detecting the BH08LS20's maximum reading and writing speeds, recording modes, buffer underrun protection and 4MB buffer.
InfoTool also shows that the BH08LS20 is an RPC-2 DVD drive. This means that the drive's region is stored in the firmware. The drive's region can be changed five times and after that it cannot be changed anymore. Unfortunately, a patched RPC-1 firmware is not yet available for this drive.
While InfoTool gives us a quick glance at the BH08LS20's features, DVDINFOpro provides a little more information on some of the drive's reading and writing capabilities. By looking at the screenshot above you can see that LG's new drive can read and write to most BD and DVD formats.
LG's new drive also supports a feature called "bitsetting." Using programs like Nero or CD Speed, you can set the book type of both DVD+R and DVD+R DL media to "DVD-ROM". For whatever reason though, the drive does not let you set the book type of DVD+RW discs.