by goldenring on Sun Mar 25, 2007 12:34 am
Hai,
Pls give solution winerror(1167) Neroerror(-500).
Windows XP 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL05 - HA 1 TA 2 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1632 >Version: AS20 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
SONY DVD-ROM DDU1632 J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046716kB)
Free physical memory: 336MB (344796kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.3.2007
UDF compilation
09:31:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
09:31:31 #2 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
09:31:31 #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
09:31:31 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2087167 (463:48.67, 4076MB)
09:31:31 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
09:31:31 #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
09:31:31 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:31:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2087168 (2087168) = #2087168/463:48.68
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2087168 blocks [I: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------
09:31:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [I: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4274520064, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2087168 | 0 | 0x00
2087168 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
09:31:31 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
09:31:31 #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
09:31:31 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
09:31:31 #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
09:31:31 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
09:31:31 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
09:31:31 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:31:31 #17 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
09:31:31 #18 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
09:31:31 #19 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:31:31 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
09:31:43 #21 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(1167) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x190a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:12 #22 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(1167) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0b6431c0: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:12 #23 Text 0 File MMC.cpp, Line 20063
Writer-Buffer for I: LITE-ON DVDRW LH-20A1P reduced to 32768Bytes
09:32:12 #24 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(1167) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0b662ac0: Len x8000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:12 #25 CDR -500 File Writer.cpp, Line 303
SCSI command aborted
I: LITE-ON DVDRW LH-20A1P
09:32:12 #26 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07bb45c0: Len x48
09:32:13 #27 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07bb4740: Len x48
09:32:13 #28 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was -1 (FFFFFFFFh)
09:32:13 #29 CDR -500 File WriterStatus.cpp, Line 162
SCSI command aborted
I: LITE-ON DVDRW LH-20A1P
09:32:13 #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
09:32:13 #31 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07bb4900: Len x48
09:32:14 #32 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07bb4a80: Len x48
09:32:14 #33 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
09:32:14 #34 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:14 #35 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
09:32:14 #36 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:14 #37 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:14 #38 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom2: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
09:32:14 #39 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
09:32:14 #40 Text 0 File SCSIPTICommands.cpp, Line 421
UnLockMCN - completed with error 55 for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
