|
||||||||
|
cfitz wrote:Harrier wrote:By the way, is this spindle typical for TY spindles (The screw cap pin)?
It is typical of older TY packaging.
cfitz
XIII wrote:Would have liked to report Verbatim DLP CD-RW/MC 80min 24X as succesful on my LiteOn LTR52327S (QS09), but unfortunately I always get 0.11% unreadable
........................Verbatim DLP CD-RW/MC 80min 24X.........24X
LiteOn LTR 48246S
Firmware SS0B...........Fujifilm/Fuji 80min 52X.................48X
Drive Type = CD-RW
Disc Type = CDR (B-)
Material = Phthalocyanine
Lead In = 97:26:45
Lead Out = 79:59:73
Nominal Capacity = 702.83MB (79m 59s 73f/LBA:359848)
Manufacturer Maybe = FUJI Photo Film Co., Ltd.
Smart-Burn Speed Limit = Wrt(48X),Rd(48X)
........................Platinum/EverMedia,NanYa 80min 48X......52X
........................Platinum/RiTEK,JS 80min 40X.............52X
TheWizard wrote:To be consistent with previous results with these discs
TheWizard wrote:MediumRare: Let me know how the Verbatim DataLife discs turn out at 24X.
No. Speed Type C1 C2 Scan
max mean max mean Speed
1 48x Audio 241 21.8 366 0.77 max (32)
2 40x Audio 12 1.095 - - max
3 48x Audio 89 17.9 1 32
4 40x Audio 13 1.204 - - max
5 32x Audio 203 20.8 246 2.49 max
6 40x Audio 204 29.5 197 8.1 max (32)
7 24x Data 14 1.34 - - max
TheWizard wrote:Just to confirm, they are 80 minute Ultra Speed (24X) CD-RW's, not 74 minute?
........................Masterbit multispeed/RiTEK,JS 80min 52X.52X
........................Platinum/RiTEK 80min 52X................52X
XIII wrote:Should I scan the front cover?
XIII
I should have a nice LiteON 166S for some K-Probe scans sometime next week!
Those tests are not accurate. You are using speed "Max", when the Max speed for this drives is completely different.
The Max speed in the LDW-401S is 12x.
The Max speed in the LTD-166S however is 16x.
Both drives will report very different results because of the different speeds. You need to test them both at 8x to get accurate results, and even then, we will still not know for sure which one is more accurate.
rdgrimes wrote:I should have a nice LiteON 166S for some K-Probe scans sometime next week!
Before you get too excited about doing error scans in the 166S, you should read THIS thread. Using a ROM drive for scanning is usefull only for comparing different burns with the same burner and media.
dolphinius_rex wrote:Hey TheWizard, when's the DVD Media Compatability thread going to be started? and what will the requirements be? I should have a nice LiteON 166S for some K-Probe scans sometime next week!
dolphinius_rex wrote:hehehe, how about Nero CD/DVD speed? I haven't used it for anything other then CDs yet, so I don't know how it handles DVDs, but it seems like the reasonable choice right?
Return to Recordable Media Discussion
Users browsing this forum: No registered users and 0 guests
All Content is Copyright (c) 2001-2024 CDRLabs Inc. |