Home News Reviews Forums Shop


I'm amazed by the LG GCC-4480B... (48x24x48x16x combo)

Burn baby burn!

I'm amazed by the LG GCC-4480B... (48x24x48x16x combo)

Postby Phoenix '97 on Tue Aug 26, 2003 6:42 pm

A friend of mine got this drive recently and I decided to play with it a little...
First I got some crappy Memorex 10x CD-RW media (CMC Magnetics manufacturer) and tried to write at 10x with it with my older 16x10x40x CD-RW drive... put this into my Lite-On 166S DVD-ROM, ran K-Probe, and got a average C1 error rate of about 3.4. This drive really doesn't like these discs, it does have problems reading them back. Next I tried the same files on the same disc with my Toshiba SD-R5002. A bit better, 0.7 error rate. I did the same thing again with the LG combo drive. I got about 7 C1 errors in an entire 14 minute block. Very good! Is it time to retire my old 16x10x40x? :(

Next, I tried reading some DVD media in it. The Princo DVD-Rs that my other two DVD-ROM drives were struggling with (LG, Lite-On 16x) were read just fine in this drive.

Makes me want to get one for my own!
Phoenix '97
CD-RW Player
 
Posts: 213
Joined: Tue Jul 23, 2002 4:11 am
Location: Winterpeg

Postby Stoner on Wed Aug 27, 2003 3:21 am

The same quality can be said about Lite-On's combo drive.

Either the Lite-On 166S is very accurate in reading all the C2s, or the Toshiba and LG are overwhelmed by all the C2s, thus leaving them out, giving you the wrong impression...
Stoner
CD-RW Thug
 
Posts: 70
Joined: Wed Apr 09, 2003 11:42 pm

Postby Phoenix '97 on Wed Aug 27, 2003 4:22 am

Hmm, I'm not sure if I was too clear on what I said... I recorded the disc at 10x with the Toshiba, LG, and LG combo, and read all three cases back on the Lite-On, giving the following errors:

LG - 3.4 (Nov. '01)
Toshiba - 0.7 (Dec. '02)
LG combo - 0.0 (June '03)

Does this suggest that newer drives give a higher quality recording on the same -RW disc? The purchase date of the drives is in brackets above.
Phoenix '97
CD-RW Player
 
Posts: 213
Joined: Tue Jul 23, 2002 4:11 am
Location: Winterpeg

Postby cfitz on Wed Aug 27, 2003 4:28 am

DVD-ROM drives like the 166S should not be used for conducting CD-R C1/C2 quality tests using KProbe. KProbe does not give accurate results when testing CD-Rs on DVD-ROM drives. Your results have no meaning, and no conclusions should be drawn from them. Try testing on a Lite-On CD-RW drive using KProbe.

cfitz
cfitz
CD-RW Curmudgeon
 
Posts: 4572
Joined: Sat Jul 27, 2002 10:44 am

Postby dodecahedron on Wed Aug 27, 2003 5:38 am

and apparently similar things apply to CDRW/DVDROM combo drives...unreliable/inaccurate at testing with KProbe.
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
In the land of Mordor, where the Shadows lie
-- JRRT
M.C. Escher - Reptilien
User avatar
dodecahedron
DVD Polygon
 
Posts: 6865
Joined: Sat Mar 09, 2002 12:04 am
Location: Israel

Postby TheWizard on Wed Aug 27, 2003 10:34 pm

Try checking the results with Nero CD Speed's ScanDisc then I can add them to the Media Compatibility List. :wink:

Oh, best to run ScanDisc on the same drive that the CD-RW disc was burned in.
No, I like women.
TheWizard
CD-RW Player
 
Posts: 2074
Joined: Fri Jun 28, 2002 6:56 pm


Return to CD-R/CD-RW Drives

Who is online

Users browsing this forum: No registered users and 1 guest

All Content is Copyright (c) 2001-2024 CDRLabs Inc.