What's your average Buffer Memory SizE ?

[eliminator]

Just for fun, post the average buffer size of all the burners you currently use

TeacW540E (8mb) + SanyoBP1700P (4mb)

(8+4)/2 = 12/2 = 6mb

[VEFF]

I am waiting for someone with a single drive with the 16 MB buffer
to post.
Nobody will be able to beat that

TEAC 40X 8 MB
LTR 40X OC to 48X (1 month old, will probably sell it today) 2 MB
LTR 32X (brand new sealed and going to sell it this weekend) 2 MB
old 1998 CDD-3610 2X Philips 1 MB
Philips USB 4X (for laptop use) 2 MB (I think)?

15/5 = 3 MB ave buffer size

[duffy]

2 MB, cause I have only one writer, , but it's interesting what jase has to say about that.

[Ken]

LG GCE-8320B 32/10/40 with 8MB buffer overclocked to LG GCE-8400B 40/12/40

How sweet it is...

[eliminator]

0o0o0opS, you just dropped your average to 5mb, cause LG8400's got only 2mb buffer !

[aviationwiz]

3 MB

2+4=6/2=3

An HP 9300i and a Visiontek 48x. I don't use the HP anymore though.

[Ken]

eliminator

You must be joking, just because I flashed my 32x to a 40x doesn't mean I now have a 2MB buffer.

[eliminator]

I did not say 2mb, I said 5mb ... that would be the average, have you had 2 drives, & of course I was joking !

What does Nero info show, how big is the buffer size now ??

[Ken]

Your right, I just wasn't sure if you were joking or not.

Nero info still shows an 8mb buffer.

[lexu8]

Hey, eliminator What happen to your old Picture? I like that old one much much better than this one

Anyway, My Yamaha CRW3200SZ =8MB, CRW3200EZ =8MB So that's 16/2 = 8 Nero said 8148KB on one and 8055KB on the other

[tazdevl]

Doesn't matter how big it is... it's how you use it.

[VEFF]

Doesn't matter how big it is... it's how you use it.

lol

[Spazmogen]

2mb. With LG's hardware buffer under run protection & Nero's "Ultra Buffer", it's all I need.

I have never had a buffer under run with my LG drive. Even at full speed.

[lexu8]

Is this question suppose to start out with just for fun? Why are some people take it so serious ?
No I'm not a pro and that is why I bought 2 Yamaha's to burnt some 400+ CDs between them two so all my DATA ,Music,Video and Importance family pictures can be store away.
So how would you use it? It true that 2MB Buffer is OK but when my POS Lite-On that come with 2 MB BURNT VERY FAST CDs But Lots of errors and alot of the CDs it burnt cannot even read back? waste lot of time and blank CDs with that last project.
I may don't know how to use it because I only using CD Burners for the past 4 years(5 Dif. units) Not long enought may be but I'm grad that I found this site so I can learn from the PRO.

[Virtua Trancer]

Is this question suppose to start out with just for fun? Why are some people take it so serious ?
No I'm not a pro and that is why I bought 2 Yamaha's to burnt some 400+ CDs between them two so all my DATA ,Music,Video and Importance family pictures can be store away.
So how would you use it? It true that 2MB Buffer is OK but when my POS Lite-On that come with 2 MB BURNT VERY FAST CDs But Lots of errors and alot of the CDs it burnt cannot even read back? waste lot of time and blank CDs with that last project.
I may don't know how to use it because I only using CD Burners for the past 4 years(5 Dif. units) Not long enought may be but I'm grad that I found this site so I can learn from the PRO.

look lexu8 im sure taz was just kidding, as he also has a yamaha with an 8MB buffer. Also so you know i do not believe the size of the buffer has anything to do with a CD burner creating more/less errors.

[casey]

LG 8160 = 2 meg buffer
LG 8240 = 8 meg buffer
LG 8400 = 8 meg buffer (yes the first models had 8 meg buffers, April 2002. firmware 1.00)
Average = 6 meg

[eliminator]

Doesn't matter how big it is... it's how you use it.

LOL, when girls tell you that, they're lying !.. just to make you feel better - they think different tho, trust me

[eliminator]

2mb. With LG's hardware buffer under run protection & Nero's "Ultra Buffer", it's all I need.

I have never had a buffer under run with my LG drive. Even at full speed.

...see what I mean, TazDevil..!

[eliminator]

Hey, eliminator What happen to your old Picture? I like that old one much much better than this one

Anyway, My Yamaha CRW3200SZ =8MB, CRW3200EZ =8MB So that's 16/2 = 8 Nero said 8148KB on one and 8055KB on the other

Well, you must be the Champ at this time !

Sorry for the CloWn bud ... some pple here got scared, so I decided to remove him

[crazed burner]

eliminator ... I want to lay claim here to be king of the hill.
My Average Buffer = 71.5 MB.

OK go ahead and yell out “Bull….” … but I can justify the claim.

Computer 1 = 3 sticks of 256MB ram plus LiteOn 40X writer.
Nero reports writer has 2MB buffer and system has 80MB secondary buffer.
Computer 2 = 2 sticks of 256MB ram plus LiteOn 24X writer.
Nero reports writer has 2MB buffer and system has 59MB secondary buffer.
Hence Average Buffer is (2+80+2+59)/2= 71.5 MB … QED.

OK CloneCD report is less impressive … only average 31.08MB buffer … however it is still a killer.
Computer 1 = 3 sticks of 256MB ram plus LiteOn 40X writer.
CloneCD reports Buffer Settings has 22.71MByte Buffer Size plus Buffer Underrun Protection Buffer has 8.37MByte Buffer Size.
Computer 2 = 2 sticks of 256MB ram plus LiteOn 24X writer.
CloneCD reports exactly the same as for Computer 1.
Hence Average Buffer is (22.71+8.37)= 31.08 MB.

On a more serious note, how come I get ended up with 8.37Mbyte Buffer Underrun Protection Buffer using CloneCD when the writer has only 2MB physical buffer?

Could someone with an 8MB writer buffer please report back what CloneCD report on the size of their Buffer Underrun Protection Buffer under the “Settings/Buffer” tab?

[ali_hajihatam]

I Have one Writer
It's TEAC CD-W540e and 8MB Of buffer Size

[Flyer22]

yo eliminator what kind of post is this?

Might just put up a poll it would be easier

[aviationwiz]

eliminator ... I want to lay claim here to be king of the hill.
My Average Buffer = 71.5 MB.

OK go ahead and yell out “Bull….” … but I can justify the claim.

Computer 1 = 3 sticks of 256MB ram plus LiteOn 40X writer.
Nero reports writer has 2MB buffer and system has 80MB secondary buffer.
Computer 2 = 2 sticks of 256MB ram plus LiteOn 24X writer.
Nero reports writer has 2MB buffer and system has 59MB secondary buffer.
Hence Average Buffer is (2+80+2+59)/2= 71.5 MB … QED.

OK CloneCD report is less impressive … only average 31.08MB buffer … however it is still a killer.
Computer 1 = 3 sticks of 256MB ram plus LiteOn 40X writer.
CloneCD reports Buffer Settings has 22.71MByte Buffer Size plus Buffer Underrun Protection Buffer has 8.37MByte Buffer Size.
Computer 2 = 2 sticks of 256MB ram plus LiteOn 24X writer.
CloneCD reports exactly the same as for Computer 1.
Hence Average Buffer is (22.71+8.37)= 31.08 MB.

On a more serious note, how come I get ended up with 8.37Mbyte Buffer Underrun Protection Buffer using CloneCD when the writer has only 2MB physical buffer?

Could someone with an 8MB writer buffer please report back what CloneCD report on the size of their Buffer Underrun Protection Buffer under the “Settings/Buffer” tab?

Well if you count RAM my average buffer is:
122.727

We are only counting the Buffer in the burner.

[eliminator]

yo eliminator what kind of post is this?

Might just put up a poll it would be easier

It's just a FuN CD-R/CDR-W p0sT

[Flyer22]

Ok since i´m already in vacations i can get that!!

Funny, simple, no problem solving posts