Home News Reviews Forums Shop


dvd burning problem

Anything else

dvd burning problem

Postby leob on Tue Jan 05, 2010 2:24 pm

Hey,
I wanted to burn some dvd's today on my laptop, but the strange thing is that sometimes my disk drive doesn't recognize my dvd's. The strange thing is, that these dvd's that I try are all exactly the same and brand new, but only a few work. From a pack of 5 now 3 are not recognized by my laptop. This pack costs over 10 euros so it's kinda frustrating if only 2 work.

The disks are DVD+RW, 1-4x speed, single sided, and of the brand TDK.
My laptop is a Toshiba Satellite P300 18M, with Windows Vista Home Premium on it. It should be able to burn DVD+RW's according to DVDInfoPro Xtreme (which is obvious because it has worked already). I just use the vista software to burn the dvd's.


It looks like the problem is with the DVD's, and not with the randomness of my laptop, because if I try a rejected disk later, it will still be rejected then.
But since they all are exactly the same and brand new (and I assume the shop isn't conning me with replacing some good disks in a pack with some faulty disks), should I then suppose it is my laptop that breaks the DVD's?
The problem is that I don't really know where the problem is :). Vista hasn't been too consistent, and so haven't I. Sometimes I try the Live File System (or so?), sometimes the mastered way. I am sorry that I can not give you a lot more info, but I have tried a lot now and my tries tend to blur into eachother. So I don't have an accurate timeline or so. What I do know is that of my first two disks, one worked and another didn't. Then my third or fourth worked too. So it isn't a broken down laser in my disk drive or so, that suddenly stopped working.

I really hope there is someone who has an idea about what could be the problem with the DVD's or with the laptop.
Leob
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm

Re: dvd burning problem

Postby Ian on Tue Jan 05, 2010 4:18 pm

It could be the discs, but TDK's DVD+RW discs are usually pretty decent. Any idea who the real manufacturer is? You can figure this out through DVDInfoPro.

Worst case, your drive is failing and/or it doesn't like them. In this case, you'll probably need to try other discs to see where the problem lies.
"Blu-ray is just a bag of hurt." - Steve Jobs
User avatar
Ian
Grand Poobah
 
Posts: 15130
Joined: Sun Apr 08, 2001 2:34 pm
Location: Madison, WI

Re: dvd burning problem

Postby leob on Tue Jan 05, 2010 5:12 pm

Hey,
Trying it again, I seem to be able to solve it in a way that I don't really understand. The last two disks (previously rejected) I tried, just became visible to the laptop once I opened the DVDInfoPro software. I didn't have to click anything (the program wasn't even fully started yet since there is some BS that comes up first about registration and all), but suddenly the icon in 'my desktop' went from '(empty) station G' to 'Blank DVD'.
Although this seems to solve the problem for now, it does seem a bit silly to pay for an activation code, if I only need it to get my pc to recognize the discs. So I still hope that somehow there is another solution for this...

Anyways: DVDInfoPro tells me this about the discs (hope this is what you refered to in your post):

Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID MBIPG101W04
Media Product Revision Number 00h
Format Capacity Blank Disc
Free Blocks 405405696
Free Capacity 4.38GB/4.70GB
Book Type DVD+RW
Media Type DVD+RW
Manufacturer Rated Speed 4.0x 5540KBps
Available Write Descriptor CLV 4.0x 5540KBps
Available Write Descriptor CLV 3.0x 4155KBps
BG Format Status Blank Disc
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1

Complete Media Code
00000000 08 02 00 00 92 0F 04 00 00 03 00 00 00 26 05 3F .............&.?
00000010 00 00 00 00 00 00 01 4D 42 49 50 47 31 30 31 57 .......MBIPG101W
00000020 30 34 00 39 23 00 94 79 64 02 20 00 9C 7A 6C 02 04.9#..yd. ..zl.
00000030 20 00 9A 7B 68 02 20 12 12 10 E0 00 F0 00 00 00 ..{h. .........


Thanks,
Leob
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm

Re: dvd burning problem

Postby Ian on Tue Jan 05, 2010 6:02 pm

What software are you using to write to the discs? The stuff built into Vista?
"Blu-ray is just a bag of hurt." - Steve Jobs
User avatar
Ian
Grand Poobah
 
Posts: 15130
Joined: Sun Apr 08, 2001 2:34 pm
Location: Madison, WI

Re: dvd burning problem

Postby leob on Wed Jan 06, 2010 3:25 am

Yeah, I just use vista to burn DVDs. It works well enough. Except of course when it doesn't find a disc.
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm

Re: dvd burning problem

Postby leob on Wed Jan 06, 2010 11:46 am

Ok, little update: I have gotten my pc to recognize all the discs from the pack now. It went like I said: 'No Disc', *open DVDInfoPro*, 'blank DVD'

But that was yesterday :)

Today I check the disc that was still in the drive: Still 'blank DVD'
I try the other one just to be sure: 'blank DVD'
I get it out.
A few hours later: I like to burn something else.
I try the last one I checked and was OK: 'no disk'.
I open DVDInfoPro and now that says: 'No Media Found'. So even that now doesn't work anymore.

A few tries later DVDInfo says the dvd is of an unknown format and this is the media information it gives me then:

Media Information
Region information N/A not a DVD-VIDEO
MediaCode
Book Type DVD-RAM
Media Type DVD-RAM
Available Write Descriptor zCLV 2.0x 2770KBps
Data area starting sector 31000h
Linear Density 0.280um/bit
Track Density 0.615um/track
Number of Layers 1

Complete Media Code
00000220 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000230 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000240 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000250 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000260 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Hope you can do something with this information.
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm

Re: dvd burning problem

Postby Ian on Wed Jan 06, 2010 5:24 pm

Sorry, I'm stumped. The failure to recognize the blank disc is probably due to an issue with autorun/autoplay or something.

The unknown format thing is a weird one too. Do you have any other software installed on your system that may be causing problems?
"Blu-ray is just a bag of hurt." - Steve Jobs
User avatar
Ian
Grand Poobah
 
Posts: 15130
Joined: Sun Apr 08, 2001 2:34 pm
Location: Madison, WI

Re: dvd burning problem

Postby leob on Thu Jan 07, 2010 4:56 am

hmm I have a lot of software on my pc :). Most of it I never use of course. Or it never worked, but I'm too lazy/cautious to delete or uninstall it.
Regarding DVD I have 'powerISO', 'DVDFab 5 Platinum', 'DeepDVD Movie', 'VLC', 'K-Lite Codec Pack', 'AC-3Filter', 'DVDVideoSoft', a lot of adobe stuff of CS3 and CS4 of which at least half doesn't work (anymore), 'RealPlayer' (but I can't burn anything since it's a free version) and then some stuff from Toshiba like 'TOSHIBA DVD player' and 'TOSHIBA DVD Movie Factory'.
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm

Re: dvd burning problem

Postby Ian on Thu Jan 07, 2010 10:06 am

You don't have any virtual disc programs installed, do you? Those things can cause problems like you're seeing.
"Blu-ray is just a bag of hurt." - Steve Jobs
User avatar
Ian
Grand Poobah
 
Posts: 15130
Joined: Sun Apr 08, 2001 2:34 pm
Location: Madison, WI

Re: dvd burning problem

Postby leob on Thu Jan 07, 2010 11:25 am

Not that I know of...
There is 'PowerISO Virtual Drive Manager'.
But PowerISO is a perfect example of those programs that I don't really know what I used them for. Can't remember to ever have used it. Don't even know (anymore) what it does... :s

Should I uninstall and delete it or is it harmless/useful?
leob
Buffer Underrun
 
Posts: 6
Joined: Tue Jan 05, 2010 2:20 pm


Return to General Software Questions

Who is online

Users browsing this forum: No registered users and 0 guests

All Content is Copyright (c) 2001-2024 CDRLabs Inc.