Home News Reviews Forums Shop


Acro Circle (Optodisc) tests to come

DVD-R/W, DVD+R/RW, DVD-RAM
Post a reply

Postby wicked1 on Wed Aug 17, 2005 8:15 pm

the disc I said I was going to watch played back fine all the way through. I am still sticking to the TY's at $25.11 per 100 shipped. I ordered 300 of them just got them and they are tyg02's. I expected g01s.
Pioneer dvr-108,NEC 3540,BenQ 1640,LiteOn 1693S
Intel pentium D 930 oc to 4.2 ghz
2 gb ddr2 1066 mhz ram
geforce 7600GT
sb audigy 2 zs platnum
hardware mpeg2 encoder card

Conscience is what hurts when everything else feels so good
User avatar
wicked1
CD-RW Player
 
Posts: 831
Joined: Tue May 27, 2003 7:26 pm
Top

More Scans

Postby player1327 on Thu Aug 18, 2005 3:03 am

First ones were decent, but a lot like the other decent scans.
I tried one with SolidBurn on at 8x...not too pretty.
Attachments
bad.png
bad.png (59.69 KiB) Viewed 831 times
badt.png
badt.png (54.39 KiB) Viewed 828 times
notbad.png
notbad.png (58.89 KiB) Viewed 829 times
player1327
Buffer Underrun
 
Posts: 13
Joined: Mon Jan 26, 2004 5:16 pm
Top

Postby RJW on Thu Aug 18, 2005 4:22 am

SOLIDBURN only helps for optimal starting strategy after that the BENQ can only correct with WOPC if that isn't asking to much from it.
RJW
CD-RW Player
 
Posts: 1379
Joined: Sun Oct 28, 2001 8:00 pm
Location: The netherlands
Top

Postby wicked1 on Fri Aug 19, 2005 11:13 pm

I just tried another test disc in my LiteOn 1693S with its new firmware KS0A.
Heres the results.
Attachments
LiteOn 1693S KS0A OptodiscR08 8X LiteOn scan.png
LiteOn 1693S KS0A OptodiscR08 8X LiteOn scan.png (33.62 KiB) Viewed 807 times
Pioneer dvr-108,NEC 3540,BenQ 1640,LiteOn 1693S
Intel pentium D 930 oc to 4.2 ghz
2 gb ddr2 1066 mhz ram
geforce 7600GT
sb audigy 2 zs platnum
hardware mpeg2 encoder card

Conscience is what hurts when everything else feels so good
User avatar
wicked1
CD-RW Player
 
Posts: 831
Joined: Tue May 27, 2003 7:26 pm
Top

Postby wicked1 on Fri Aug 19, 2005 11:13 pm

transfer rate test still sucks.
Attachments
LiteOn 1693S KS0A OptodiscR08 8X LiteOn transfer rate.png
LiteOn 1693S KS0A OptodiscR08 8X LiteOn transfer rate.png (31.75 KiB) Viewed 807 times
Pioneer dvr-108,NEC 3540,BenQ 1640,LiteOn 1693S
Intel pentium D 930 oc to 4.2 ghz
2 gb ddr2 1066 mhz ram
geforce 7600GT
sb audigy 2 zs platnum
hardware mpeg2 encoder card

Conscience is what hurts when everything else feels so good
User avatar
wicked1
CD-RW Player
 
Posts: 831
Joined: Tue May 27, 2003 7:26 pm
Top

Postby dolphinius_rex on Sat Aug 20, 2005 1:34 am

those transfer rate tests look the same as some of my pressed DVDs when I run them through the DW1640. I'm wondering what the cause of it is, since it's not the PIE/PIF errors in many cases... or the jitter level. I don't think it's the beta level either, but it's more of a possability.
Punch Cards -> Paper Tape -> Tape Drive -> 8" Floppy Diskette -> 5 1/4" Floppy Diskette -> 3 1/2" "Flippy" Diskette -> CD-R -> DVD±R -> BD-R

The Progression of Computer Media
User avatar
dolphinius_rex
CD-RW Player
 
Posts: 6923
Joined: Fri Jan 31, 2003 6:14 pm
Location: Vancouver B.C. Canada
Top

Postby RJW on Sat Aug 20, 2005 7:34 am

:o That's a LiteON 1693 whose reading these disc's not a benq.

Huge difference Lite On DVD-writers are in most cases the most tollerant readers. (More tollerant as Benq 1640 !)

This makes me think what reports the Lite On if you put speed at max.
Do the error rate still looks nice(no huge rise compared to 4x) in the end ?
RJW
CD-RW Player
 
Posts: 1379
Joined: Sun Oct 28, 2001 8:00 pm
Location: The netherlands
Top
Previous
Post a reply

Return to DVD Writers

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All Content is Copyright (c) 2001-2025 CDRLabs Inc.