NVE30118 Bug (For Craig)

[beach-hobo]

I captured four MPEG-2 file via WinTV-PVR2(USB) by Hauppauge. I can transcode and burn the MPEGS with no problem with NVE30114. I am using an external BenQ 1620 and it works correctly with both the USB2 or Firewire interface.

The burn fails with NVE30118. The last few lines on the log are as follow: Fails in both USB2 and Firewire attachment. I can provide the full Nero error logs if necessary, just tell me where to send them.


[11:02:13] DVDEngine 11:02:08 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2625
[11:02:13] DVDEngine Finished writing file VTS_01_1.VOB of size 310437888 bytes (151581 sectors)
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:08 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1397
[11:02:13] DVDEngine Writing VTS_01_0.BUP at sector 152365
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:08 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2625
[11:02:13] DVDEngine Finished writing file VTS_01_0.BUP of size 16384 bytes (8 sectors)
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:09 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1397
[11:02:13] DVDEngine Writing VTS_01_0.IFO at sector 752
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:13 AM #23 SCSI -1064 File Cdrdrv.cpp, Line 1432
[11:02:13] DVDEngine SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06EB0400
[11:02:13] DVDEngine Status: 0x04 (0x01, SCSI_ERR)
[11:02:13] DVDEngine HA-Status 0x00 (0x00, OK)
[11:02:13] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[11:02:13] DVDEngine Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[11:02:13] DVDEngine Sense Code: 0x21
[11:02:13] DVDEngine Sense Qual: 0x00
[11:02:13] DVDEngine CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
[11:02:13] DVDEngine Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
[11:02:13] DVDEngine 0x00 0x00 0x00 0x00 0x21 0x00
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:13 AM #24 CDR -1064 File SessionUtils.cpp, Line 49
[11:02:13] DVDEngine Invalid block address
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:13 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 712
[11:02:13] DVDEngine Failed to release fragment at 752
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:13 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2588
[11:02:13] DVDEngine Failed to release fragment at 752
[11:02:13] DVDEngine
[11:02:13] DVDEngine 11:02:13 AM #27 Phase 179 File APIProgress.cpp, Line 276
[11:02:13] DVDEngine Writing file to disc failed
[11:02:13] DVDEngine
[11:02:13] DVDEngine Existing drivers:

[CCampbell]

Yes, could you send me the full logs for NVE30118 and the succesful one with NVE30114?

Just send it to me at techsupport4@nero.com

Thanks!

There are known issues with NVE30118 and Recode2.2 that will be addressed in a new Web Release around Jan 20th or a little later.

They are:

1) burn-at-once broken in NVE and Recode
2) NVE freeze when we add *.wav


I'm sure we may find some more before the new web release. We are doing more tests and checking the forums to see what else we may have missed in our QA process.

Regards,

Craig

[bossanova808]

It seems Disc-At-Once is certainly borken - in multiple ways. below is the error I get:

[16:22:30] DVDEngine 4:22:30 PM #27 SCSI -1183 File Cdrdrv.cpp, Line 1432
[16:22:30] DVDEngine SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x09020400
[16:22:30] DVDEngine Status: 0x04 (0x01, SCSI_ERR)
[16:22:30] DVDEngine HA-Status 0x00 (0x00, OK)
[16:22:30] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[16:22:30] DVDEngine Sense Key: 0x08 (KEY_BLANK_CHECK)
[16:22:30] DVDEngine Sense Code: 0x00
[16:22:30] DVDEngine Sense Qual: 0x00
[16:22:30] DVDEngine CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
[16:22:30] DVDEngine Sense Data: 0xF0 0x00 0x08 0x00 0x00 0x00 0x00 0x0E
[16:22:30] DVDEngine 0x00 0x00 0x00 0x00 0x00 0x00
[16:22:30] DVDEngine
[16:22:30] DVDEngine 4:22:30 PM #28 CDR -1183 File SessionUtils.cpp, Line 49
[16:22:30] DVDEngine Blank check command error
[16:22:30] DVDEngine PIONEER DVD-RW DVR-106D\H2 T1
[16:22:30] DVDEngine
[16:22:30] DVDEngine 4:22:30 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 712
[16:22:30] DVDEngine Failed to release fragment at 688
[16:22:30] DVDEngine
[16:22:30] DVDEngine 4:22:30 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2588
[16:22:30] DVDEngine Failed to release fragment at 688
[16:22:30] DVDEngine
[16:22:30] DVDEngine 4:22:30 PM #31 Phase 179 File APIProgress.cpp, Line 276
[16:22:30] DVDEngine Writing file to disc failed

I can provied full logs/infoTool information if required.

[CCampbell]

We have a known bug in NVE30118 when it comes to the 'Burn-At-Once' feature. This feature is not working in our latest WebRelease. Please disable this option, and you should find it will then result in a succesful burn operation.

We have already resolved this bug, and will have this resolution in our next Web Release.

Sorry for the trouble.

Regards,

Craig

[beach-hobo]

We have a known bug in NVE30118 when it comes to the 'Burn-At-Once' feature. This feature is not working in our latest WebRelease. Please disable this option, and you should find it will then result in a succesful burn operation.

We have already resolved this bug, and will have this resolution in our next Web Release.

Sorry for the trouble.

Regards,

Craig

Hi again Craig,
Thanks for your advice to take off the "Burn-At-Once" feature. I have tried again to burn some different MPEG-2 files. With the BAO feature on this time the DVD was created correctly.

I turned off the BAO feature and now NVE30118 locks up before the lead-in is finished. My configuration is a BenQ 1620 in an external case with a Prolific PL-3507 ChipSet (11/06/2004) firmware using Firewire interface. Does work with USB2 interface.

Appears there is still a problem with NVE30118...

Hope this helps internal testing...

[CCampbell]

Hi Beach-hobo,

Yes, our engineers have found a number of issues in NVE30118, and are addressing them now. I do not have a full list of these issues, or I would post them.

We hope to have a new version posted on our website very soon.

Regards,

Craig