kingmax_smg_titan_ssd.pngThe KINGMAX SME Xvalue super value SSD has become the first choice for entry-level users after it was released. In response to the continued increase of market demands for SSD, KINGMAX has again released a new product – the Full Capacity SMG Titan.

KINGMAX is a manufacturer of memory-related products; products are sold globally and it has over 200 dealers around the world. The opening of new capacities for NAND Flash on the market, drove prices of the SSD down to the sweet spot, which helped increase the permeability of SSDs into the market. KINGMAX SSD products series are also expected to benefit from this.

There are many brands available on the market. The problem of capacity vacuity is frequently seen, which causes consumers to be suspicious. KINGMAX has always paid extra attention to the problem of specifications. The SATAIII Full Capacity SSD released this time comes in four capacities for consumers to choose from: 64GB, 128GB, 256GB and 512GB. The SMG Titan also used a SandForce control chip with high speed NAND Flash kernels and the standard SATAIII 6GB/s interface; it uses flash memory to store data and has a maximum reading speed of 550MB/s while the writing speed can also reach 520MB/s. The SMG Titan also supports RAISE fault-tolerant technology and can perform redundant storage to the data; it also supports Error Correction Code (ECC) and Cyclic Redundancy Check (CRC). The use of wear measurement and NAND Flash chip monitoring functions can prolong the lifespan of the NAND Flash chip, so not only is the durability of the product increased, the security of the data is also enhanced. What’s more surprising is that the SSD SMG Titan can be stored under environments with temperatures between -55°C~95°C, already enterprise-level specification. To buy such high-specification products at the price of consumer products is definitely worth every penny!

The SSD SMG Titan allows consumers to enjoy excellent computer operating environments; its advantages include high reliability, power-saving and noise-free, and it can also significantly reduce the risk of machine malfunction. It supports Native Command Queuing (NCQ), to optimize the order of file data accessing sequence most efficiently and increase the overall work efficiency. It also has a built-in Error Correction Code (ECC) and Global Wear Leveling functions and anti-shock capabilities up to 1500G, to protect important data.

[Specification]

  • Capacity: 64GB/128GB/256GB/512GB
  • Dimension: 100.5mm(L)x69.85mm(W)x7.0mm(T)
  • Weight: 71g
  • Interface: SATA III 6Gb/s
  • Supports Global wear-leveling
  • Supports NCQ/Trim
  • Supports 55bit BCH ECC
  • Sequential read and write :
    - 64GB Read : Up to 550 MB/s Write : Up to 500 MB/s
    - 128GB Read : Up to 550 MB/s Write : Up to 520 MB/s
    - 256GB Read : Up to 550 MB/s Write : Up to 520 MB/s
    - 512GB Read : Up to 550 MB/s Write : Up to 520 MB/s
  • Random write:
    - 64GB/128GB/256GB up to 75,000 IOPS
    - 512GB Up to 40,000 IOPS
  • Operating voltage: DC 5V +/-5%
  • Operating Shock: 1500G/1ms
  • High level reliability, MTBF:1.2 million Hours
  • Operating Temperature: 0~70℃
  • Storage Temperature: -55~95℃
  • 3 years warranty

[Feature]

  • Full capacity, high performance
  • High speed transmission and quick start
  • Rapid transfer than HDD
  • Shock/Vibration resistance
  • No Audible Noise
  • High reliability
  • Global wear-leveling increases product life and optimize performance
  • Strongly Wear leveling algorithm to enhance lifetime
  • Strongly ECC algorithm to correct data
  • Application: NoteBook/Desktop